商鋪名稱：湖北盛世鴻運科技發展有限公司
聯系人：劉（先生）
聯系手機：
固定電話：
企業郵箱：honyunhancai@126.com
聯系地址：武昌區烽火機電大市場
郵編：43000
聯系我時，請說是在焊材網上看到的，謝謝！
SKD61進口模具焊條
8407-H13焊絲
|
特 性
|
焊金耐熱 耐腐蝕 耐磨耗性能優良,用于修復基體合金相似的高溫加工工具,如H13鋼.
硬度HRC 43～46度A hot work tool steel that is tungsten free,Good hot hardness up to 565℃.For repair of H-13 tool steels and appications in the die casting and forging industries subject to high thermal gradients.
|
|
用 途
|
焊補有色金屬壓鑄模具 PA POM PS PE EP Weld-repair non-ferrous metal die-casting molds PA POM PS PE EP
|
|
規 格
|
1.0￠ 1.2￠ 1.6￠ 2.0￠ 2.4￠
|
|
特 性
|
Cr W V 多元合金焊絲 ，熔敷金屬具有自硬性的馬氏體組織。具有高硬度耐高溫沖擊，焊后機加工困難。硬度HRC48～52 Cr multielement alloy welding wire, w. v. deposited metal has since the rigid martensite organization. With high hardness, impact resistant machining difficulty after welding. Hardness HRC48 ~52
|
|
用 途
|
焊補熱鍛模 沖模 熱加工工具 熱切模等Hot forging die weld-repair hot-working tools etc. Eagerly
|
|
規 格
|
1.0￠ 1.2￠ 1.6￠ 2.0￠
|
|
特 性
|
焊金耐疲勞 耐熱 耐磨耗沖擊,一般熱壓鑄模具常有龜裂紋狀,大部分是熱應力引起,熱處理調至適當硬度改善其壽命,硬度太高或太低均不適用.HRC43～47 Welding gold fatigue resistance, abrasion resistance impact resistant heat die-casting molds, most often turtle crack is caused by thermal stress, heat treatment to improve its service life, suitable hardness hardness too much or too little are not applicable.
|
|
用 途
|
焊補熱氣沖模,銅鋁鋅熱鍛模,鋁擠壓模. Hot stamping, weld-repair copper aluminum and zinc hot forging, aluminum extrusion die
.
|
|
規 格
|
1.0￠ 1.2￠ 1.6￠ 2.0￠
|
